I think that's correct, with one exception, the springs.
THe 1500 Midgets had taller springs to bring the ride height
up a tad (US Bumper Height requirements).
> You can probably start here:
>
> http://www.ketcherside.net/chassis.htm
>
> It's a scan of the 1500 Bentley Manual for alignment
> check. It was posted to the mgcars.org.uk BBS. I'd assume
> other year spridgets are similar...
> -=Chris
>
> Chris King - cbking@alum.rpi.edu
> http://mywebpages.comcast.net/kvcbk/
>
>
>
> ---------- Original Message
> ---------------------------------- From:
> Tommy_Samuels@MARKIVAUTO.COM Reply-To:
> Tommy_Samuels@MARKIVAUTO.COM Date: Tue, 4 Mar 2003
> 08:41:39 -0500
> >List,
>
> >Where can I get good dimensions of the front suspension
> components without >setting my parts car up on blocks and
> performing a layout/blueprinting >project?
> >
> >Tommy
> >67 Sprite driver
> >69 Sprite - donor
> >61 MGA project - still gathering bits
> >Locost 7 project - on the drawing board
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|