spridgets
[Top] [All Lists]

Re: 2 questions

To: Dave Yealy <lbc@littlebitcountry.com>
Subject: Re: 2 questions
Date: Thu, 13 Feb 2003 17:22:05 -0800
Cc: Spridgets <spridgets@autox.team.net>
References: <3E4BA875.1090503@exit109.com> <007c01c2d39e$5fe3e6e0$6401a8c0@DIRTYSHIRT2>
You can get original flasher units made by Lucas (in England) from Holden in the
UK.  They offer a repro screw type connector or an original Lucas (early 70s
vintage) Lucar connector type fitting unit.  I ordered one of the Lucas units
during my restoration drilled out the Lucar connectors, tapped it and used 
screws
to connect it and it works perfectly.  The dash light works in synch with the
turn signal lights.  The repro goes for 10.98 pounds and the Lucas unit goes for
5.98 pounds.  Go figure.     ( http//www.holden,co,uk )  Click on e-catalog and
and type in part number 35010      then check part number 35020.  A nice picture
pops up and the price.  You can order over the internet.  No financial interest,
yada, yada.  Get the catalogs, alot of neat original Lucas lighting.
Mike MacLean-60 Sprite

Dave Yealy wrote:

> It took me 3 flashers to get one that wouldn't do what yours is doing, you
> would get one or two flashes and then nothing, but the outside lights would
> be ok.
> Now my dash indicator light flashes like it's nuts but the outside lights
> flash normal.
>
> Dave
> 60 Bugeye
> 61 Bugeye (Project)
> 69 MGB (For Sale)
> 74 MGB (Parting Out)
>
> ----- Original Message -----
>
> > #2 Bugeye signal dash indicator lamp wiring.
> > My signals work, the dash lamp only blinks once and very briefly no
> > matter how long the signal is on. I have a seperate ground to the bulb
> > and I tried a different flasher.
> > What's up with this?
> > --
> > Frank Clarici

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>