spridgets
[Top] [All Lists]

Re: Performance valve advice sought Oct 2002 22:28:18 -0400

To: awboat@labyrinth.net (Andrew Weaks)
Subject: Re: Performance valve advice sought Oct 2002 22:28:18 -0400
Date: Tue, 8 Oct 2002 22:27:45 -0400 (EDT)
Cc: spridgets@autox.team.net (spridgets)
Good show, Andrew!

Let us know what they say....we will all
learn something, I am sure.




Cap'n. Bob
    '60 :{)  
Received: from smtpin-2204.public.lawson.webtv.net (172.16.213.134) by
  storefull-2171.public.lawson.webtv.net with WTV-SMTP; Tue, 8 Oct 2002
  19:23:03 -0700 (PDT)
Received: from labyrinth.net (mail.labyrinth.net [63.66.160.19]) by
  smtpin-2204.public.lawson.webtv.net (WebTV_Postfix+sws) with ESMTP id
  E4B85FE45 for <PilotRob@webtv.net>; Tue,  8 Oct 2002 19:23:04 -0700
  (PDT)
Received: from labyrinth.net [63.66.162.136] by labyrinth.net with ESMTP
  (SMTPD32-6.06) id A31551090078; Tue, 08 Oct 2002 22:23:17 -0400
Date: Tue, 08 Oct 2002 22:28:18 -0400
From Andrew Weaks <awboat at labyrinth.net>
To: "Robert E. Shlafer" <PilotRob@webtv.net>
Cc: spridgets <spridgets@autox.team.net>
Subject: Re: Performance valve advice sought
References: <1601-3DA24487-4903@storefull-2171.public.lawson.webtv.net>

sent e-mail off, we shall see, I hope. Thanks

"Robert E. Shlafer" wrote:

> Andrew-
>
> Using 1.5 rockers with a kit designed within which there are springs
> designed
> for the stock rocker ratio (1.3 more or less) will in effect "stiffen"
> those springs,
> making for a higher rpm wherein valve
> "float" will be encountered.
>
> This will also increase loading on all
> valve train parts (including cam lobes).
>
> All of this is expected of the "tuned" unit
> wherein an "extension" of the stock "redline" is desired for more top
> end power (as in racing).
>
> If all you wish is better top end performance WITHIN and UP TO the
> stock factory "redline", then softer valve
> springs are in the offing using 1.5 rockers.
>
> On the Kent website click onto "contact
> us" and address your question to the
> attention of "tech support". The cam
> (kit) maker is normally the best source of
> advice for use of his product.
>
> Let us know what advice you get in this
> respect, please!! :)
>
> Cap'n. Bob
>     '60 :{)

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>
  • Re: Performance valve advice sought Oct 2002 22:28:18 -0400, Unknown <=