Ron (Grasshopper...the Unlearned One) is no doubt sitting in his newly
purchased racecar in his garage, making vroom vroom noises, with the wrong
stick shift in his hand...
----- Original Message -----
From "Geoff Branch" <gjbranch at attbi.com>
To: "Paul A. Asgeirsson" <Pasgeirsson@worldnet.att.net>;
<JARplanner@aol.com>
Cc: <Spridgets@autox.team.net>
Sent: Tuesday, September 03, 2002 7:19 AM
Subject: Re: Oil Cooler Hose Connections
> Now, I have been thinking about this. The pressure of a system has
nothing to
> do with the size of a system. It has to do with the SMALLEST restriction
within
> the system. Example: a one quart can with 20 # of pressure has the same
> pressure as a 55 gal. can with 20# of pressure, right? So as long as the
oil
> cooler is pressurized, the pressure must still be whatever the system was
> before. Am I missing something here?
>
> Where is Ron Soave??
>
> Geoff Branch
>
> ----- Original Message -----
> From: "Paul A. Asgeirsson" <Pasgeirsson@worldnet.att.net>
> To: <JARplanner@aol.com>
> Cc: <Spridgets@autox.team.net>
> Sent: Monday, September 02, 2002 10:30 PM
> Subject: Re: Oil Cooler Hose Connections
>
>
> > Hi Jim,
> >
> > Daniels right. There is a substantial drop in oil pressure,--- to the
engine!
> > The reading you see on the oil pressure guage is before the restrictive
3/8"
> hose,
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|