In a message dated 8/19/02 8:32:36 PM Eastern Daylight Time,
spritenut@Exit109.com writes:
> BUT after many years under the car, you may need a
> chisel. NOT to chisel it off but a chisel has a wide enough blade and a
> six sided shaft where a socket wrench will fit over. Not that giant
> breaker bar with a 10' cheater pipe and maybe, just maybe it will
> unscrew like the book says.
>
Under advice of a lister, I took a proper sized #8 bolt and ground the end of
it down until it was a hammer fit into the slot in the fulcrum pin. Once
seated, a 1/2" or larger socket and ratchet worked pretty well once I got the
thing loosened.
--David C.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|