Hooked the ammeter up by cutting the big white wire
from the alternator to the starter solenoid and
spliceing it in. When hooked up the ammeter shows a
plus 30 amps ( I can hear the alternator loading and
since the belt is a bit loose it starts to squeak)
Turn on the lights the ammeter still shows plus 30
amps. When the engine is off and I turn on the lights,
no indication on meter.
The big white wire is the one that goes from a bolt on
the alternator(it's a Delco) connection. From this
same connection is a thinner red wire that runs into a
plastic plug type fitting that has another thin red
wire coming out of it.
Where have I gone wrong? (this time)
thanks, bill b.
LAUNCH - Your Yahoo! Music Experience
http://launch.yahoo.com
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|