Thank you to everyone who replied to my question about getting the bottom
bolts off the exhaust manifold on a 1500. I actually used a 9/16 socket with
a universal joint adaptor on a 3/8 drive. The DPO or whoever only put one of
the nuts on, so the time it took was cut in half.
Another question, what can I use to cut the exhaust pipe, I'm going to
install the headers then get the car to an exhaust shop to do the welding,
both at the header end and the new muffler end. Again, thanks for all of the
encouragement to try to do the work myself.
John Poynton
79 Midget "Yellow Fever"
Havertown Pa 19083
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|