Re: Pressed Steel Rockers

Robert,
     I have seen that also, but there are a lot of repairs and fixes being done
to these cars that would have never been thought of in the 60s.  I thought maybe
someone was re-bushing pressed steel rockers because of their light weight
advantage over forged.
Mike MacLean-60 Sprite

Robert Duquette wrote:

> The Bentley manual says about 'pressed-steel type' that "Rebushing is not
> practicable and must not be undertaken.  When bushes become worn new rocker
> assemblies must be fitted.".
>
> Forged type - different story.