The answer...
There are two p-clamps in the transmission tunnel just like it shows in the
Moss Catalogue.
Stick your arm in through the rear of the transmission tunnel, follow the pipe
forward and you can just feel the rear p-clip if you stretch. The securing
bolt securing it is visible on the driver's side of the tunnel, just in front
of the seatbelt mounting.
Remove the gearstick shroud and you can reach the front p-clip.
/Louis
>> -----Original Message-----
>> From: Louis Mehr (EML)
>> Sent: Monday, September 03, 2001 9:44 AM
>> To: 'spridgets@autox.team.net'; 'mgs@autox.team.net'
>> Subject: Sprite brake questions...
>>
>>
>> Good morning listers,
>>
>> 2/ The front-to-rear pipe runs through transmission tunnel
>> but with no obvious clamping in sight. What clamps should
>> be used in practice and is this a propshaft out job ?
>>
>>
>>
>> Louis Mehr
>> Manchester, UK
>> 1971 AH Sprite RHD- now running (sort of)
|