In a message dated 10/3/01 7:13:23 AM Eastern Daylight Time,
nateley@email.msn.com writes:
<< I use a layer of clear packing tape over the window. Very easy and cheap
to
replace when it clouds. >>
I have a fits-a-fender sized bead blaster (5' wide x 6' tall x 3' deep).
I buy a package of hard-surfaced plastic "ripoffs" that stick to the glass
around the outer edges, and about once a year change the glass ($20 for a 12
x 36 tempered plate)
I cut another hole in the top to fit a second window and use a 3 bar
fluorescent light to add to the lighting in the cabinet. Something else
thats nearly indispensible is a foot control. Also, use the largest diameter
plumbing for the air (I use 1" pipe and 1/2" air line to the gun. A vacuum
system also makes for dust free blasting, and media recovery. Mark C
|