If my memory serves me... aren't the bolts that secure the tranny mount
"pointed"
on the ends, helping with alignment? Bugeye's are.
"Charles F. Christ" wrote:
> robert,
>
> try using an awl or a small phillips screw driver as an alignment tool.
> start all 4 bolts and leave them loose untill you have all 4 started in
> their threads. this will allow you the tiny bit of movement in the mount
> to align remaining bolt holes. if your trans mounts are a bit soft
> initially you may have a rather distressing looking situation. but using a
> tool to pull the metal part of the mount into position through the bolt
> holes will greatly ease your concerns. it's getting the drive shaft into
> the transmission i dislike !
>
> chuck
|