What you have to watch with Mobil 1 is that you use the 15/50 and not the
0/40. In the early days of Mobil 1 I think it was a 5/50 or 0/50.
The 0/40 is on the thin side for an A Series IMHO.
Daniel1312
In a message dated 03/08/01 10:12:12 Pacific Daylight Time, rbc43@home.com
writes:
<< Yeah, you've got to watch the synthetics
with "older" vehicles or vehicles produced
to wide tolerances for whatever reasons
I've run my Sprites including the one I raced on Mobile One since it came
out.
I've had no oil pressure problems except about 5 psi lower oil pressure. This
engine has run on Mobile One since break in with no oil pressure problems. I
took it apart and found nothing wrong and concluded I wasn't patient enough.
I
put it in Wednesday and when I get it hooked up and take some of the
precautions suggested, I hope it will be all right! Let you know soon!
Roger Cotting
|