Ron,
Thanks, that's what was done this time, but for some reason, massive
leaks for no obvious reason.
Jeff
> > the archives. For the cork valve cover gasket,
>> should one pre-soak in
>> motor oil, or just smear lithium grease on both
>> surfaces, or install
>> dry?
>
>Jeff, I just put a tiny bead of RTV on the side that
>mates to the valve cover, let it setup for a little
>bit, then bolt it down. never had a leak, and the RTV
>makes it real clean to pop the cover off and on.
>
>=====
>Ron Soave
>"Driver Carries No Cash"
>Yahoo! Auctions - Buy the things you want at great prices.
>http://auctions.yahoo.com/
--
__________________________________________________
Jeffrey H. Boatright, PhD
Assistant Professor, Emory Eye Center, Atlanta, GA
Senior Editor, Molecular Vision
<http://www.molvis.org/molvis>
<mailto: jboatri@emory.edu>
|