The maintenance my wheels get is a wash once every year or so. It is best to
grease the splines on the hub but since the grease doesn't wear off this is
once in a blue moon job. I tighten the knock off when I fit the wheel and
the next time it sees the hammer is when I come to take the wheel off.
There is no big deal about wire spoked wheels apart from the fact they are
really great looking.
Daniel1312
In a message dated 06/12/00 20:07:39 Pacific Standard Time,
Toby@intri-plex.com writes:
<< Wire wheels require maintenance and tightening with a hammer
in order to keep the wheel in place >>
|