spridgets
[Top] [All Lists]

Re: Tensile strength of bolts in re: Torque

To: WFO Herb <froggi@cdsnet.net>, Charley & Peggy Robinson <ccrobins@ktc.com>
Subject: Re: Tensile strength of bolts in re: Torque
Date: Wed, 18 Oct 2000 11:11:15 -0500
Cc: spridgets@autox.team.net
References: <9c.82f071b.271d1237@cs.com><000301c038d2$87898c40$6c27893e@pbncomputer><39ED80C7.C61EFD3B@ktc.com>
He had something to do with a Mangusta, no?
---
At 10:55 AM 10/18/2000, WFO Herb wrote:
>This Carol Shelby sure is a busy lady.  Sounds like the type of person that
>should have gone into building some kind of race car or at least a fast street
>car!
>
>Charley & Peggy Robinson wrote:
>
> >   Shelby raced in just about every SCCA event there was in his day.  Was
> > a driver, owner and later founded Shelby Racing.  Responsible for many
> > innovations in prototype racing.
> >
> >   CR
> >
> >
> >
> > rob thomas wrote:
> > >
> > > ----- Original Message -----
> > > From: <DLancer7676@cs.com>
> > >
> > > And these were quality bolts with the threads
> > > > rolled in and not cut in (that is another fascinating area of 
> discussion
> > > > about bolts).
> > > >
> > > > --David C.
> > > >
> > >
> > > Nice book on the subject by some guy called  Carrol Shelby (sp?)
> > > D 1312 put me onto it.
> > > Most enlighteneing.
> > > Now I fear bits falling off after years of "fastener abuse"


<Prev in Thread] Current Thread [Next in Thread>