spridgets
[Top] [All Lists]

Re: Genny Still Dead

To: Brad Fornal <toyman@digitex.net>
Subject: Re: Genny Still Dead
Date: Sun, 15 Oct 2000 09:53:33 -0500
Cc: Spridgets <Spridgets@autox.team.net>
Organization: Computer Helpers
References: <39E91694.94300AF5@digitex.net>
Hi Brad,

  I had to dig out an old Motors manual to look up the polarizing
procedure, it's been so long since I've done it.

  To polarize a generator with an externally grounded field, momentarily
connect a wire from the "BAT" to the "GEN" or "ARM" terminal of the
voltage reg.  You should get a spark. 

  To polarize a generator with an internally grounded field, disconnect
the field wire from the regulator and momentarily touch this wire to the
regulator "BAT" terminal.  

  Hope this helps,

  CR


<Prev in Thread] Current Thread [Next in Thread>