In a message dated 10/11/2000 8:44:16 PM Eastern Daylight Time,
ultrawildcat@hotmail.com writes:
<< do i need to weld in supporting flat stock across the the width
of the car right behind the doors and also across the holes where the doors
used to be before i took them off,to keep the whole thing from flexing so
out of shape i will never get it straight again. >>
Not for the floor removal, but if you have to remove the A-post and or the
rocker panels, inner and/or outer, it is a good idea then to weld flat stock
across the doors or in some other way keep the integrity of the door gap.
--David C.
|