I fabricated aluminum mounts for the 7/8" front bar on FROGGI. Do as Daniel1312
recommends... don't do what I did; go poly or similar.
Herb
Daniel1312@aol.com wrote:
> What can happen is that you don't notice the oversteer because the understeer
> kicks in first. A 3/4 bar is ok but unless you really know what you are
> doing use rubber blocks rather than anything solid to mount it in. Putting
> some negative camber in the front end makes a big difference. Any money
> spent reducing the weight of the car produces dividends all round.
>
> small change on a big subject
>
> Daniel1312
>
> In a message dated 14/09/00 03:17:08 GMT Daylight Time,
> mdlempert@worldnet.att.net writes:
>
> << We're also fitting a 3/4" sway bar in
> front. Hope this fixes the oversteer problem. >>
|