Hi Spridgeteers,
I found, finally, the source of the wiper problem. It seems the
cable is stuck in the second to the last piece of tubing section (the
section with the curve) When I replaced a wiper box with a stripped
thread, I must have tightened the two halves of the wheel box too tight,
as there is an ever so slight crease in the tubing (we're talking barely
noticeable) It is stuck. I can 't move it forward or back. I have
pulled on the engine compartment end of the cable with all that I'm
worth (or dare too) and it won't budge. Likewise, I cant seem to budge
the tubing off from the end of the cable under the dash.
Suggestions?
Help!?
Steve.
--
_________________
| Steve McGee,
| Atty. at large
| samesq@pacbell.net
| Spridget page http://home.pacbell.net/samesq/links.html
| Mopar page http://home.pacbell.net/samesq/mopar.html
|________________
"Only if you are unafraid of the truth will you ever find it."
|