spridgets
[Top] [All Lists]

Re: Convertible installation

To: "Noel, William M" <noel@BATTELLE.ORG>
Subject: Re: Convertible installation
Date: Wed, 19 Apr 2000 12:14:20 -0500
Cc: "'spridgets@autox.team.net'" <spridgets@autox.team.net>
References: <8CA56DD70F4AD311A99900A0C9960C103A468B@ns-bco-mse7.im.battelle.org>
You use the six Tennax on the sides and there is a chrome strip above the boot
that holds down your top across the rear deck area, don't forget to put the male
snaps in place so that you can use a tonneau cover also. I hope this helps some.
Brad

"Noel, William M" wrote:

> I need help, again.
>
>  Included with the top are six female
> "tennax" connectors, and a multitude of snaps, both male and female.
>
>         Does the '72 require 6 "tennax" connectors across the back and one
> on each side?
>
>         Where do the snaps go?
>
> I would also very much appreciate if anybody know of any '72s that are
> within 50 miles of Columbus, Ohio.  I think if I could actually see one with
> the top installed I could get through this fairly easily.
>
> Thanks for any help.


<Prev in Thread] Current Thread [Next in Thread>