Bill,
Only 1/2 inch! I stripped a bugeye years back and it
had over 1 inch of bondo. The PO had laminated some
plies of fiberglass with in it. Was a major mess to
grind off.
John Holliday
67 Fprod street sprite
66 parts car
--- Bill Mantz <bmantz@roanoke.infi.net> wrote:
> Started stripping the Bugeye from front to back. I
> was real proud not to
> find any rust. Then I made it to the rear deck.
> Bondo covers the
> complete deck, up to 1/2 inch thick in one spot, a
> circle about 8 inches
> in diameter. If I can find a use for used bondo,
> I'll be rich. I knew
> better, but I was in a hurry that morning and forgot
> the magnet. I guess
> that's the worst part, I knew better. If anyone has
> any use for used
> bondo, I've got plenty, Cheap too.
>
>
>
>
|