The later cars had front sway bars as an option. You can get the parts and
install them on your car. If you use your A-arms, you will want to reinforce
them at the mounting point. Back the surface with a piece of steel roughly
equal to the thickness of the metal that you drill through. Bolt through the
A-arm and backing plate to mount the sway bar links. They should hold up
until the car rusts completely away.
----- Original Message -----
From <BCAH at aol.com>
To: <spridgets@autox.team.net>
Sent: Monday, February 21, 2000 7:53 PM
Subject: A arms
> Has anyone put a front sway bar on a Bugeye ,---if so what brand and size?
My
> A arms will have to be drilled to mount it,---------will this weaken them
?
> Bob C
|