| 
In a message dated 10/28/99 2:58:59 AM, BCAH@aol.com writes:
<< I see ads for spare tire hold down straps but can see no signs of any 
fittings in the boot. What is supposed to be there?  I am going to bend up 
some thin rods and weld 'em in there but thought I would ask the list for the 
official answer.   Bob C >>
Bob,
If you have a bugeye look on the boot floor board almost against the rear 
panel about 1/3 of the way out from the center.  There should be two "U" 
shaped pieces of rod attached to the floor.  Would guess they are about 1/2 
inch high.  There should be a third one about the center of the car on the 
rear side of the differential hump.
Good Luck
Bob (and Annice)
 |