Bill:
> I was going to re-route the steel fuel line ....
Just a suggestion, but if you stop at the local marine supply house, you
should be able to pick up a glass inline filter (the glass cylinder with
a replaceable element). The one I'm thinking of comes with fittings for
1/4, 5/16, and 3/8 lines so it can be installed to a variety of
applications. These are virtually identical to the fancy ones sold in
speed shops (some of which are made by Purolator, I think), and
replacement filters are readily available. I've seen the one described
at Kmart, of all places, in the sporting goods section. Put a 1/4 on one
end, and a 5/16 on the other, and Voila! You took care of the problem,
and added a little extra filtration, to boot.
Luck!
Rich
|