Hi Bob,
Well since I didn't see any answers I'll give you mine. Puddles 60 Sprite, has
a
sway bar. It is mounted through the A frame with a reinforcement plate welded
in. The center is mounted on the frame as it passes under. It is pretty rigid
and works fine. The frame underneath the center of it is stock and
unreinforced. Hope this helps. I think mine came from Mini Mania.
Rick
BCAH@aol.com wrote:
> A quick question for the list.If I put a front sway bar on the Bugeye, can I
> get away with drilling holes in the A arms to attach it or do I need A arms
> already set up for it? Do later A arms have a stiffing plate welded in to
> reinforce where the holes are drilled? Also, I suppose the center section
> attach fitting must be attached to something more solid than what I can see
> under the car. Weld in more metal? Question #2, Can anyone recomend the best
> sorce for a Panhard rod? Thanks in advance. Bob C
--
52 MGTD,Sparky 74 MGB, B-tris 76 XJ12 Coupe, Jacque
60 Bugeye, Puddles 58 MGA Coupe, Ruby
http://www.softcom.net/users/walters
http://www.geocities.com/Heartland/Acres/4644
|