Hi Ken,
I have the "detent" (Plunger-2nd speed synchronizer,) and the spring that
goes under the cover. Check that ALL the detent springs and balls are
present and the springs not broken.
Send me your s mail address and I'll pop them in the mail. Won't go as
attachments! I have lots of experience rebuilding these and you're
welcome to use me as a resource if you wish as you rebuild this gearbox.
Paul
PAsgeirsson@juno.com
On Fri, 8 Oct 1999 10:54:43 -0500 "Ken Waringa" <kwaringa@dynsys.com>
writes:
>I am currently rebuilding the gearbox for my 74 Midget. When I took
>it
>apart the little "détente" (not sure this is the right word) in the
>first/second gear hub is missing. I have all the springs and balls,
>but the
>détente is missing. What I'm calling the détente is the piece that
>prevents
>1st and 2nd gear being engaged at the same time. It is in the center
>hub
>under the ring gear that shifts into 1st or 2nd. If anyone has a
>spare I
>could sure use one. The gearbox has been apart before (not by me)
>because I
>found a gear tooth in the bottom, but all my gears are in good shape.
>I
>also need one of the springs that go under the side cover. I've tried
>Moss,
>but they don't sell these parts. I hate to buy a full transmission
>for
>these two parts. Also if anyone has any experience rebuilding these
>gearboxes and can provide helpful advise it would be appreciated.
>
>Thanks
>Ken
>
|