spridgets
[Top] [All Lists]

Re: coil/distributor wire

To: carolien@coastalnet.com
Subject: Re: coil/distributor wire
From: Paul A Asgeirsson <pasgeirsson@juno.com>
Date: Mon, 23 Aug 1999 23:07:20 EDT
Cc: spridgets@autox.team.net
References: <01beedde$19461ae0$0100007f@default>
Reply-to: Paul A Asgeirsson <pasgeirsson@juno.com>
Sender: owner-spridgets@autox.team.net
Hi Carol

Be aware that the wire from the side of the dizzy to the points is
sometimes suspect.   14 or 16 ga. on the other should be adequate.

Paul
PAsgeirsson@juno.com

On Mon, 23 Aug 1999 20:09:37 -0700 "carolien coulter"
<carolien@coastalnet.com> writes:
>Hi everyone,
>Well tonight I discovered that one of the reasons the car won't start
> other than the starter is not in  the car right now either) is that 
>the
>wire between the coil and distributor is bad. I got a good reading on 
>one
>side of the ignition coil and not on the other or at the distributor. 
>When I
>just grabbed a piece of wire and connected it between the coil and
>distributor I did get a good reading on both sides of the coil and the 
>earth
>side of the distributor. So I need to replace that little piece of 
>wire
>which is what I don't know:What kind of wire should I use. 12 ,14 or 
>18
>gauge?or does it matter?Thanks, Carol.
>


<Prev in Thread] Current Thread [Next in Thread>