spridgets
[Top] [All Lists]

Re: exhaust bandage (waste of time)

To: Spridgets@autox.team.net
Subject: Re: exhaust bandage (waste of time)
From: Christian Stanton <cstanton@pixley.com>
Date: Mon, 23 Aug 1999 11:58:13 -0400
Reply-to: Christian Stanton <cstanton@pixley.com>
Sender: owner-spridgets@autox.team.net
Jeff, don't be a DCO! - Do it right the first time.

I vowed never to replace a single exhaust system component again after rusty 
chips in my eyes, ringing ears from a cold chisel and burnt fingers from hot 
steel.  I usually wind up tearing the thing up again after several months to 
replace the components I didn't the previous time.

I regret it and curse myself everytime I break this vow to save a few bucks! 
(:-})  I'm not preaching, I have patched stuff up in order to make it a few 
days until a paycheck comes in or the parts arrive.

My $.03
Christian

P.S. Antisieze compound and stainless or bronze nuts will save you time and 
frustration later. 

>>> Richard Shipman <mbelect@mindspring.com> 08/23 11:27 AM >>>
Hi Jeff,

My personal opinion is that you should just bite the bullet and replace the
offending pipe... they are quite inexpensive and if you value your time at
all, it is really false economy to dig that far into the exhaust system to
do a temporary patch on an old rusty pipe that is probably ready to start
leaking in a new spot as soon as you patch the existing leak.

Once you start tearing the old system apart to do your "patch", you will
soon find that the old clamps, hangers, etc. will also need replacement and
you will end up getting frustrated trying to make-do with the rusty old mess.

Just my 2 cents... been there...done that.

Richard
'74 Midget
'68 MGBGT
'58 Morris Minor 1000


>
>Jeff Boatright wrote:
>
>> Does anyone have experince with exhaust pipe repair kits? I have a small
>> hole in the pipe. It is on the top surface of the pipe, just below my feet,
>> of course. Welding is out for now as I've spent my car budget for the rest
>> of the year...

                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
       

<Prev in Thread] Current Thread [Next in Thread>