Hi,
This weekend on a super-hot day, my water temperature gauge started moving
toward Cold rather than Hot as time went on. Then it stopped working all
together. I found that the wire (the one with the coil around it) had
snapped right where it meets the radiator at this connection that come to a
point that the wire sticks into. Do I need to replace the whole apparatus,
or do I just need to stick the wire back in? I couldn't get the nut off the
radiator with moderate pressure, so I figured I wouldn't play with it in
care coolant went shooting everywhere.
All help is greatly appreciated.
John
1975 Midget.
|