spridgets
[Top] [All Lists]

Re: Parts washer

To: spridgets@autox.team.net
Subject: Re: Parts washer
From: Shawn Knight <eybdoogy@earthlink.net>
Date: Wed, 28 Jul 1999 11:49:11 -0400
References: <7c5307f3.24cf26ad@aol.com> <379ED6FA.5F3930D@innernet.net>
Reply-to: Shawn Knight <eybdoogy@earthlink.net>
Sender: owner-spridgets@autox.team.net
Pardon me if this is a stupid question, but what goes into bucket #5?

Shawn

Norm Cannon wrote:

> Allen,
> Five 5-gallon paint buckets containing less than a gallon of the following 
>work
> for me: first - Simple Green + water, second - water, third - white vinegar,
> fourth - Eastwood's parts wash, and last OxiSolv from Eastwood. Steel parts go
> into bucket #1, 2, 3, 2, 4, 2; aluminum and plastic parts go into #1, 2.
> Norm
>
> Ajhsys@aol.com wrote:
>
> > I just bought a small (3 1/2 gal.) parts washer from Harbor Freight.  I was
> > just wondering what everybody uses in theirs.  Is Simple Green a good enough
> > de-greaser?  Should I rinse the parts with water and blow dry after using
> > Simple Green?  Any other suggestions?
> >
> > Keep it cheap, because like Frank, "we tight!"
> >
> > TIA,
> >
> > Allen hefner
> > '77 Midget
> > '92 Mitsubishi Expo LRV Sport


<Prev in Thread] Current Thread [Next in Thread>