Gary,
No wonder it didn't work... super gluing a piece of wire is NOT an acceptable
way to O-ring a head! I don't mean to be harsh, but....
WFO Herb
Gary Speckman wrote:
> David, we have tried this "O-ring" thing several times on the Team Thicko
> Sprites. One season, WST consistently blew head gaskets, blowing out
> between number three and four cylinder.
>
> What this involves is taking a thin piece of copper wire and either super
> gluing it around the perimeter of the cylinder hole in the gasket, or
> lifting up the small metal ridge that is formed around some types of head
> gaskets, and forcing the wire in that space. All this does is provide a
> little additional thickness(at TT, we're plenty thick, alright)around the
> cylinder hole opening of the head gasket. When it is compressed under
> torque, it squashes and in theory, provides a better seal.
>
> Sometimes this works if the head is warped a bit. Getting the little wire
> to stay put on the head gasket is time consuming as all four cylinder holes
> have to be "ringed". And then you pray they stay in place when you put the
> head on, etc etc..
>
> I simply cannot recommend this procedure as it didnt help with WST's
> problems and for the amount of time spent doing it...its just not worth it.
>
> Gary
> TT
> Plover WI
> www.geocities.com/MotorCity/Downs/1579
> www.thicko.com
> >
> PS Thank you for your thoughtful reply to my Pigs thing. I guess the
> reason most people subscribe to this list is because they read the
> description of it on the "lists" page. After a while, the "chat" part of it
> turns a lot of them off. Thats just how some people are. Me? I am a
> glutton for punishment, so I stay subscribed.
|