It's not that late a Midget - only a '74 (no elec
ignition). The resistance wire quit several years ago
(symptom: kept frying coils) and, on the advice of the
tech advisor of the local MG club, I wired in the
Chrysler one. This has worked for the last five or so
years with no problem.
>If your new coil is already ballasted
>internally there's no way to wire the
>hot-start trick; just bypass any
>existing ballasts and wire your coil
>directly to an ignition-on source.
So, that's a "yes" to my originial question, right?
===
***The above address is for list purposes only. Please send private e-mail, as
before, to Nory@webtv.net
-----NORY
http://www.geocities.com/SiliconValley/Way/9101
Don't assume that because you have found one problem, you have found the ONLY
problem.
|