| To: | mbelect@mindspring.com, mgrazian@ltcm.com |
|---|---|
| Subject: | Re: 1500 Crank Shaft Nut Size |
| From: | RBHouston@aol.com |
| Date: | Mon, 17 May 1999 16:52:54 EDT |
| Cc: | spridgets@autox.team.net |
| Reply-to: | RBHouston@aol.com |
| Sender: | owner-spridgets@autox.team.net |
In a message dated 5/17/99 12:05:49 PM Pacific Daylight Time, mbelect@mindspring.com writes: << I'm holding in my hand the 1-5/16 inch (3/4" drive) Craftsman socket I used to remove my 1275's front crankshaft bolt. I used a 3/4" to 1/2" adapter and my 1/2" breaker bar to get it loose. Don't forget to straighten the locktab washer before trying to use the socket! Good luck, Richard Shipman '74 Midget >> And pretty darn good typing for only one hand too! Robert Houston |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | First Drive of '99 in '62 Sprite MKII, Dave Vrba |
|---|---|
| Next by Date: | Re: May West Knoxville Driving Challenge, Daniel1312 |
| Previous by Thread: | Re: 1500 Crank Shaft Nut Size, Richard Shipman |
| Next by Thread: | First Drive of '99 in '62 Sprite MKII, Dave Vrba |
| Indexes: | [Date] [Thread] [Top] [All Lists] |