Howdy,
I have been following this subject of the Nasty Spridget Drain Plug and find it
quite interesting.
At first I thought this was much ado about nothing, but now I am beginning to
see that there is more to this than just a lowly "plug".
The fact that this "thread" (I hate that term) has shown such life indicates
that it may truly be someting special.
Rather than just limit this to the spridget list, I would like to see this as a
full blown mini-series. Jane Seymour could star as the car owner, James Garner
as the mechanic or WAIT how about Harrison Ford as the wrench!
See, there is more to this drain plug thread (I hate that term) than you
thought. Let's get together on this. Maybe we could formulate a screenplay,
present it to National and really do something with this.
Jay Fishbein, CT
On 02/09/99 06:34:41 you wrote:
>
>Are the threads really ok on a US pipe thread plug for this
>application? I seem to remember reading a book about MGB's which
>warned about the threads in the B's oil sump plug (and a few other
>"plumbing" locations) being BSP (British Standard Pipe?), and
>incompatible with US standard pipe threads. Not knowing myself, it
>scared me away from doing such substititutions on the Midget. If the
>nominal sizes are close between the US and British, a substitution
>would probably work for a couple of on-offs, since it's a force-fit
>anyway for pipe threads, but I'd worry about the thing eventually
>distorting the threads too much to seal on repeated removals. Anyone
>know about British pipe thread and if this is an issue for Spridgets?
>
>MD
>
>
>
>
>---Bill & Cindy <fatboy@metro.net> wrote:
>>
>> At 07:03 AM 2/8/99 -0600, you wrote:
>> >We've seen some good suggestions on how to make an appropriate tool
>for
>> >removing Spridget drain plugs. I'm just wondering, did anyone else
>> >replace their plug(s) with a more normal one when they changed their
>> >fluid?
>> >
>> >Rich
>> >Council Bluffs, Iowa
>> >
>> >'74.5 RB MGB "Miss Maggie"
>> >'78 Chevy Half-Ton "Waltzin' Matilda" (LBC Support Vehicle)
>> >'79 Midget "Miss Molly"
>>
>>
>> Rich,
>>
>> We replaced our differential plugs with ones from a Ford. Not only
>do they
>> have a 3/8" female hex, allowing you to use your ratchet and
>extension for
>> removal and installation, they are magnetic as well. If memory
>serves me,
>> they are 1/2" pipe thread. Should be able to get them at most auto
>parts
>> stores.
>>
>>
>>
>>
>>
>> >
>> >richard.arnold@juno.com or rdarnold@neonramp.com
>> >
>> Bill & Cindy
>>
>>
>
>
>
>
|