In my set, that piece is made up of three pieces, one for each side, and a
third for the top. They are stitched together with a piece of vinyl to
cover each seam. As far as I know, this is the same as the original tunnel
carpet.
ctp
At 2:27 PM -0800 1/15/99, Justin Cook wrote:
>It seems to me that the scary part would be that hump on the
>driveshaft tunnel where the shift lever comes out...
>
>This leads into my DPO story. When I got my sprite, there was this
>crappy plastic console over the transmission tunnel from the dash back
>to behind the seats. When I removed the piece of ****, I found that
>the nice carpet in the car didn't cover the area under the console -->
>thus my interest in DIY carpet, or at least patching a piece in.
|