spridgets
[Top] [All Lists]

Re: Side Curtain Seal Source

To: Bkitterer@aol.com
Subject: Re: Side Curtain Seal Source
From: "William M. Gilroy" <wmgilroy@lucent.com>
Date: Tue, 06 Oct 1998 11:29:23 -0400
Cc: bthor@master.adams.com, spridgets@Autox.Team.Net
Organization: Lucent Technologies
Original-cc: bthor@master.adams.com, spridgets@autox.team.net
References: <fa5ff693.3619a8c5@aol.com>
Reply-to: "William M. Gilroy" <wmgilroy@lucent.com>
Sender: owner-spridgets@Autox.Team.Net
> Try using "ZAP-A-Gap" to glue the joints back together.  This product is made
> by Pacer Technology and we have found it in hobby stores. When we redid our

ZAP is just a Cyanoacrylates glue, like crazy glue.  I have used this stuff
for building model airplanes.  It comes in various viscosity's  from thin
to thick.  There web site is http://www.pacertech.com/

As a side note I think this stuff was first used as a field dressing
by the military.

-- 
Bill Gilroy
E-mail:    wmgilroy@lucent.com
Telephone: 732-957-4775
Fax:       732-957-4775

<Prev in Thread] Current Thread [Next in Thread>