Re: Clutch replacement update

[Frank Clarici <spritenut@Exit109.com>]

Robert Duquette wrote:

 
> I've a question:  The generator adjustment ...  Under the generator there
> is a piece of metal that acts as a connection between the bottom bolt on
> the generator and the block(?).  There are 2 holes in this piece of metal.
> One is a circular bolt hole and the other is an elongated bolt hole to
> allow for adjustment.  Mine was installed with the elongated hole at the
> block end.  This seems backwards to me!  Is it?
> 
> Robert
> '65 Sprite

No. The slotted side goes to the block.
The slotted side takes a 3/8" bolt, the single hole (if never drilled
out) takes the 5/16" bolt from the generator.

-- 
Frank Clarici
Toms River, NJ
Lots of LBCs
http://www.exit109.com/~spritenut