| To: | dthompso@total.net, casoich@sgi.net |
|---|---|
| Subject: | need to know before painting |
| From: | GMari58175@aol.com |
| Date: | Fri, 25 Sep 1998 02:02:01 EDT |
| Cc: | spridgets@Autox.Team.Net |
| Reply-to: | GMari58175@aol.com |
| Sender: | owner-spridgets@Autox.Team.Net |
In a message dated 98-09-24 21:09:37 EDT, dthompso@total.net writes:
<<
I do still need an idea from someone about how much and where the thick
undercoat or stone chip proofing was sprayed.
>>
Daniel,
The undercoating for the rear wheel well was applied on my car (origianl
unrestored) as follows:
painted on with brush, heavier on lower portion of well and goes up to as
diagramed below: / } { \
l } { l { and } indicate where coating
is applied
-----l } { l
hope this helps. PS: This is for rear well. Front is different.
george marinos
sprite MKII AN6
glen rock, nj
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Temporary sign off, GMari58175 |
|---|---|
| Next by Date: | RE: Sway bar mounting bolts, Bruce Henderson |
| Previous by Thread: | Re: need to know before painting, Doug Ingram |
| Next by Thread: | Re: need to know before painting, Ulix Goettsch |
| Indexes: | [Date] [Thread] [Top] [All Lists] |