Jason,
AH HA. I think you've hit on it! That fuel gauge, BF2300/02 is for MGBs.
For the Sprites it should be :
MK1 FG2530/31, MK2 FG2530/64, MK2 1098cc FG2530/70 , MK3 ,4 FG2530/70.
Hope this helps.
Peter C.
----------------------------->
At 08:07 AM 8/5/98 -0400, you wrote:
>Hi!
>
>OK, I measured the resistances at points on the fuel sender.
>Full - ~10ohms
>Half - ~45
>Empty - ~90
>
>Figuring there was at least a variance in resistance, I checked this
>connected to the fuel gauge. At Full on the sender, the gauge reads Full,
>but at empty on the sender, the gauge sits around half. This makes sense
>with the resistances posted before, since half was around 90ohms.
>
>Is this a problem with the sender?? Are there any parts that can be cleaned
>or fixed inside the sender or just get a new one??
>
>Also, the fuel gauge has the PN BF2300/02. Am I looking at the wrong number
>for the gauge?? If this is the wrong part, can I use this one??
>
>That's a handful of questions! This should be the last project before
>Encounter! WooHoo!
>
>Jason.
>
>
>| Jason Urban - APOGEE LABS 215-699-2060 |
>| CA Studio www.dynanet.com/~crackerarts |
>| '95 Z/28 6spd '65&'67 Austin-Healey Sprites |
>
Peter Caldwell
MGC-GT , 100-4, '31 MM8 Cammy, Innocenti S,
'52 Champ, '60 L-R 109 SW, 3 '64-73 L-R 88's
nosimport@mailbag.com
|