No! the rotor is attached to the hub and comes off with it. No need to
remove those bolts unless you are replacing the rotors. You do need to
remove the bolts holding the caliper.
LM
-----Original Message-----
From: Brian L. Chaffins <bchaffin@shutter.net>
To: Spridgets <spridgets@Autox.Team.Net>
Date: Friday, July 10, 1998 6:59 PM
Subject: How do you take Midget wire wheel hubs off?
Can anyone please give me with a hint as how they get the 4 bolts holding
the splined hub loose from the front brake rotor? The bolts are very close
to the hub itself and I can't get a large ratchet or wrench on to get a good
amount of leverage? Also can't get the impact in close enough?
I'm also assuming that these 4 bolts come off first before I can remove the
center nut to service the bearings?
Thanks
Brian
|