Re: 79 Midget low oil pressure warning light

["Matt Liggett" <mliggett-receive-spridgets@elise.kiva.net>]

GuyWeller wrote:
> David Vizard suggests using a ball bearing in place of the little
> bullit shaped oil pressure relief valve. Sorry can't remember what
> size.  Havn't tried it myself but apparently as well as slightly
> increasing the spring pressure, it is also less likely to stick or get
> jammed open by sludge in the oilway.

This is Vizard's advice for the A-series.  This advice I would be careful
transalting to other cars without research.  The wrong-sized bearing
could end up IN your sump.
-- 
        Matt Liggett
        '60 Mini, '70 Midget, '89 SAAB 900t SPG