Chuck,
if it's only the speedo, you can just reposition the needle. Check first
if the needle points at the little mark on the face if you move if over
the bottom peg. Then you can pull it of and move it relative to that
mark.
Ulix
On Fri, 3 Apr 1998, Chuck Ciaffone wrote:
> Hey Folks,
>
> Just confirmed my suspicions. The odometer seems to be
> reading correctly; at least it matches the reading in
> a newish Accord over the same 6 mile commute. So the
> odo works ok, but the speedo seems from 10 to 20 mph
> high, depending on how fast one is actually going.
>
> I did remove and lube the speedo head, to no avail.
> Have any of you had and/or fixed this kind of problem?
>
> chuck (chuckc@ibm.net)
>
>
Ulix __/__,__
.......................................................... (_o____o_)....
'67 Sprite
|