i checked my car this afternoon, and came up with
the following information. the brackets are 4"
long, 1/4" wide. the bolts attaching them to the
fascia are 1/4" diameter by 1/2" long. the inner
end of the brackets attach to a lip on the inside
of the firewall. the attaching screws are #4 or #6
screws, 1/4" long.
mike neff
60 sprite
-----Original Message-----
From: mike neff <proraly@worldnet.att.net>
To: jburruso@pacbell.net <jburruso@pacbell.net>
Date: Friday, March 06, 1998 6:13 PM
Subject: Re: Facia Mounting?
>there are 2 small arms that go from the bottom of
>the fascia to the firewall/transmission tunnel. i
>don't know the size of the bolts/nuts, but they
>are small.
>-----Original Message-----
>From: jburruso@pacbell.net <jburruso@pacbell.net>
>To: Spridgets@Autox.Team.Net
><Spridgets@Autox.Team.Net>
>Date: Friday, March 06, 1998 9:10 AM
>Subject: Facia Mounting?
>
>
>>Having Lurked awhile while I catalog the zillion
>parts that are my 1960
>>disassembled BugEye project car, I am now slowly
>putting it all
>>together.
>>
>>Both BugEye manuals that I have speak about two
>mounting points under
>>the facia. I found the holes but what do the
>bolts mount to? Is there
>>a bracket underneath the fascia that I am
>missing?
>>
>>Also, does anyone know the size and type of
bolts
>or machine screws that
>>are the fascia mounting hardware.
>> Thanks,
>>
>>Joe Burruso
>>AN5L26473
>
|