Looking into the foot well. Right hole is 39 mm from the front wall and 54
mm from the frame on the right. Left hole is 53 mm from the front wall and
73 mm from the frame on the right. Measurements are to the center of the
hole.
Larry Miller
-----Original Message-----
From: Rick / Carolyn Walters <walters@mail.softcom.net>
To: Dave Woerpel <dwoerpel@wi.net>
Cc: Spridget List <spridgets@Autox.Team.Net>
Date: Friday, December 26, 1997 6:17 PM
Subject: Re: Throttle pedal
Hi Dave,
I went out to get the measurements you wanted, only to find that I don't
have any holes in mine either. Puddles is still under construction so
the P.O must have replaced the floor boards? Let me know what you find
out, thanks.
Rick
52 MGTD, 74 B, 76 XJ12C (Wife's), & Puddles (60 Frogeye)
http://www.softcom.net/users/walters
Dave Woerpel wrote:
>
> Happy Holidays Listers!
>
> Now that I'm somewhat recovered from overeating and wanting to take
> advantage of my son being home from college, I have a question.
>
> I replaced the Bugeye's floorpans and they don't have holes for the
> throttle pedal mount.
> On the Bugeye the pedal is mounted to the floor by two bolts. Is there
> anyone willing to get down on their hands and knees and measure the
> position of the holes (bolt heads) from the toe-board and the
> transmission tunnel ( that would give me dimensions 90° apart. Watch
> out for the steering wheel on the way in and out!!! I've learned to
> renove the steering wheel for this job. :)
> Thanks in advance!
> Dave Woerpel
> '59 Bugeye 17606
|