I really doubt it, but anything is possible. It LOOKS like a standard
mechanical pump. Any suggestions on what to look for?
Chas Douglass -- Seattle WA
Ulix Goettsch wrote:
>
> Chas, are you possibly using a non-standard fuel pump that puts out too
> much pressure?
> Ulix
>
> On Fri, 12 Dec 1997, Chas Douglass wrote:
>
> > First project on the Sprite is brakes -- they're still under way...
> >
> > Second project is carbs. PO pointed out strong tendency to flood when
> > starting. I stripped carbs, rebuilt with standard rebuild kit, and put
> > back together. The jet in the float of the rear carb MAY have been
> > stuck, but I'm not sure...
> >
> > At any rate, got it all back together and: the rear carb floods. In
> > fact, gas drips from the jet (new).
> >
> > Any ideas? I've double/triple checked the float and it seems to be
> > fine. Could the carb jet bearing (not replaced) possibly be the
> > culprit? I can't think of much else to adjust/replace!
> >
> > Thanks!
> >
> > Chas Douglass -- Seattle WA
> >
>
> Ulix __/__,__
> .......................................................... (_o____o_)....
> '67 Sprite
|