My '60 Sprite appears to have a PCV valve on the breather tube between
the rocker cover and the air cleaner. I don't see this part listed by
Moss (although I've missed stuff before!), and I find no mention of it
in the shop manual.
This valve sits, or is supposed to sit, in a rubber grommet/seal in the
rocker cover. The grommet, valve, and breather tube are all in rotten
shape, and I want to "fix" it.
The engine appears to be the later 948 from an MG and not the original
948.
Any suggestions? Is the PCV valve a late addition that I can just
scrap? If so, where would I get a fitting, or what might I use to make
a new breather tube just "plug in" to the rocker cover?
Thanks!
Chas Douglass -- Seattle WA
|