The thread on a banjo fitting is the same as the thread on the straight in
hose end, and both seal with crush washers - Mini Cooper S uses the straight
hose fittings, so I checked. So, just order some banjo bolts and new crush
washers, double check the sizes as there are two common sizes of banjo bolt
(3/8 and 7/16), and don't forget that there are two different size of crush
washer for the stock fittings.
Brian
At 10:30 PM 07/11/97 -0500, you wrote:
>Just a thought. Could the car have a Big Brake conversion. The MGB calipers
>don't use the Banjo fitting. This would be assuming that you havn't had the
>car very long. If you have ever put on new pads then you would know if they
>were not Spridget calipers.
>
>Larry Miller
>
|