A previous owner installed a Crane Cams XR700 unit on our GT6 MK 3. It has
worked perfectly over the years. It does have a separate control box that is
mounted on the cowl. If you use a Pertronix, make sure to feed it with a
full 12 volts and not through the ballast resistor/wire. The lower voltage
will kill the unit.
Alex Thomson
-----Original Message-----
From: Spitfires [mailto:spitfires-bounces@autox.team.net] On Behalf Of Doug
Mitchell
Sent: Saturday, September 13, 2014 8:05 PM
To: Spitfires
Subject: [Spits] Electronic ignition
Spitted ones,
I am finally ready to bite the bullet and replace the points with electronic
ignition. Any recommendations? I've looked at the Pertronix, are there any
others? I want to keep the existing distributor as I like the mechanical
tach.
Thanks,
Doug
dmitchel@sbcglobal.net
Sent from my mobile phone
_______________________________________________
Spitfires@autox.team.net
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/spitfires/aljlthomson@charter.net
_______________________________________________
Spitfires@autox.team.net
Archive: http://www.team.net/archive
|