spitfires
[Top] [All Lists]

[Spits] Copper Brake Lines Needed

To: <spitfires@autox.team.net>, <SPIT6CGT6@yahoogroups.com>
Subject: [Spits] Copper Brake Lines Needed
From: "Daniel Parrott" <parrotthead01@comcast.net>
Date: Thu, 17 Oct 2013 16:31:28 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: spitfires@autox.team.net
Thread-index: Ac7Ld9tu9d66KQAgQxW15gTc4MpKGw==
I'm looking for a source for a pair of brake lines for my Spit Six.  I need
the brake lines that go between the Master Cylinder and the PDWA.  One is 12
inches long, (3/16 inch diameter) with two 3/8 inch 24 pitch male fittings
(bubble flare ends).  The other is about 14 in long with one 3/8 inch 24
pitch male fitting at one end, and a 7/16 inch 20 pitch male fitting at the
other.  Any ideas?

 

Dan Parrott

Savannah, Georgia

1980 Triumph Spitfire "PJ", AKA "Rat"

1973/1978 Spit Six "Joseph"

1957 Chevy Belair "Mayflower"
_______________________________________________

Spitfires@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • [Spits] Copper Brake Lines Needed, Daniel Parrott <=