You may have t resort to using a torch to burn the rubber away and knock the
outer steel sleeve out using a cold chisel.
Joe
---- Roger Elliott <elliottr@rmi.net> wrote:
> Hi,
>
> I am still working on my differential and leaf spring. I am trying to
> replace the mounting bushings on both, but cannot get them out.
>
> They are the ones with a external metal sleeve, rubber then an internal
> metal sleeve. Both the differential and spring are out of the car.
>
> On the spring I have tried using a bolt - socket that that bushing will
> fit into - bushing - socket about the same size as the bushing then a
> nut and tightening it. I didn't get anywhere. I don't have a socket
> large enough for the differential bushing to slide into.
>
> Any suggestions on how to get them out?
>
> Thanks,
> Roger
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as spitlist@cox.net
>
> Spitfires@autox.team.net
> http://autox.team.net/mailman/listinfo/spitfires
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
http://www.team.net/archive
|